OEM & Volume
Robotics-assisted lines at our Redmond, Oregon facility run around the clock, delivering consistent mil-thickness accuracy across every part in a production run. From a pilot batch to a full production contract, the quality does not change. Finished parts ship to customers across the US, Canada, and internationally.
Single Source. Every Coating.
Production runs require consistency above all else. Our Redmond, Oregon facility runs 24/7, with robotics-assisted lines that hold tight tolerances across every cycle. Parts come out the same on batch 1 as they do on batch 500, and every run goes through the same prep, coat, cure, and inspection sequence before it ships.
We are the only full-service coating facility in Central Oregon operating Cerakote, powder coating, and hydrographics under one roof. That means a single purchase order, a single point of contact, and no split shipments between vendors. Manufacturers from Redmond and Bend to customers across the US, Canada, Europe, and Asia rely on that single-source efficiency.
Since 2013 we have partnered with 25+ OEM manufacturers spanning firearms, aerospace, automotive, industrial, and recreational equipment. That breadth of substrate and environment experience directly informs how we set up and validate each new production run.
Surface Engineering
Production coating takes more than booth capacity. It takes repeatable prep, locked application parameters, controlled cure cycles, and an inspection gate, so the 50th part matches the first. We validate a first article, then scale the same process across recurring production runs.
Locked, repeatable process
First-article validation
Inspected & production-ready
Why Manufacturers Choose Us
Robotics-assisted application and controlled cure cycles keep film thickness, adhesion, and finish appearance consistent from the first part to the last in a run. Process parameters are locked per customer specification, so repeat orders match the approved first article without renegotiation.
Round-the-clock operations from our Central Oregon facility mean production volume does not have to wait. We structure our schedule around your delivery requirements, and we discuss realistic lead times as part of every quoting conversation so nothing surprises your assembly line.
Cerakote, powder coating, and hydrographics in one facility near Bend, Oregon. If your product line spans multiple coating types, one contract and one shipment covers it. No vendor management across three separate shops, no mismatched paperwork, no finger-pointing on quality escapes.
Parts are inspected before they leave the facility. We catch defects before they reach your assembly line or your customers. That gate is part of the standard production process, not an add-on, and it applies to pilot batches and high-volume runs alike.
OEM Partnerships
Inside the Facility
Our Redmond, Oregon facility is set up for volume, not one-offs. Dedicated racks, controlled cure environments, and robotics-assisted application lines support continuous runs. The images below show the kinds of parts and finishes that move through our production floor on a routine basis.
Available at Production Volume
Each coating below is available at full OEM production volume from our Central Oregon facility. All three are run on the same quality system, with the same inspection gate, and can be combined on a single order when your product line requires it.
Thin-film ceramic coating for maximum hardness, corrosion resistance, and color retention on metal components. As a certified Cerakote applicator we run H-Series, C-Series high-temp, and Elite finishes at OEM volume, with locked application parameters per customer spec.
Thick, UV-stable, zero-VOC production coating for industrial parts, architectural metalwork, automotive components, and structural hardware. Hundreds of colors and textures. Suited for high-volume runs where surface durability and appearance uniformity both matter.
Water transfer printing for complex decorative patterns on metal, plastic, wood, or glass. Custom camo, carbon fiber, wood grain, and branded graphics applied at production volumes. Used by OEM partners in the sporting goods, firearms, and consumer products markets.
Common Questions
We work with manufacturers at a range of volumes, from initial pilot runs to ongoing large production contracts. Every engagement starts with a quote, so reach out and tell us your quantities.
Consistent finish starts with process control, not just equipment. Our robotics-assisted lines hold application parameters within tight tolerances, and every batch goes through the same prep, coat, and cure sequence. We inspect parts before they leave the facility.
Yes. Because we operate Cerakote, powder coating, and hydrographics under one roof, a product line that requires different finish types can be handled in one facility, under one contract, shipped together.
Lead times depend on the coating type, part complexity, and current schedule. Our production lines run 24/7, which gives us meaningful throughput capacity. We discuss timeline as part of the quoting process and work to fit your schedule.
Yes. We ship finished parts across the US and Canada, and internationally to customers in Europe and Asia. Packaging and logistics are part of the production conversation.
We coat steel, aluminum, stainless, titanium, cast iron, and a range of plastics depending on the coating technology. Cerakote and powder coating are primarily metal-focused. Hydrographics extends to plastics, wood, and glass. Part geometry, pre-treatment requirements, and substrate material are all part of the quoting conversation.
Explore More
